The item has been successfully added to your quote basket.
More
A full range of system specific locking plates designed to suit your profile. The plates are all custom engineered to ensure they accurately fit your profile system without any need for additional end caps or packers. The integral end caps and design of the steel u-rail ensure that the plate is in the correct position every time.
The fixing screw hole positions are specifically configured for each profile, and ensure where possible that the screws always fix into reinforcing. Adjustment features are designed into many of the plates to ensure optimum compression and weathersealing. With locking plate suites for over 200 PVCu, timber and composite profile systems, FUHR have a secure and user-friendly solution for all applications.
Latch Deadbolt Plate
Hook Plate
Roller Plate
Round Bolt Plate
Adjustable Round Bolt Plate
Mushroom Plate
Double Shootbolt Plate
Single Shoot Bolt Plate
One and Two Piece Keep Plates
Incorporating all the features and benefits of FUHR striker technology these keeps will save time in the factory and for installers. The one and two piece plates are profile related; they locate accurately and reliably, with complete integrity between the different locking points. The adjustment ensures the right compression and weathersealing.
The One Piece Keep is compatible with the FUHR 856 Type 3 Lock and the 859 Type 3 Lock. The Two Piece Keep is compatible with the FUHR 856 Type 6 Lock and the 859 Type 6 Lock.
Hook and Keep alignment:
The hook and keep should be aligned using the guideline on the hook plate. Ensure the hook engages correctly avoiding friction on which can result in damage to the hook, there should be a 2mm gap between the line on the hook plate and the flat of the hook as shown in the diagram.
Latch and hook adjustment:
Take care not to over adjust the hook keep as this can damage the keep - do not rotate through 360º. A screwdriver and a 4mm allen key will be required when adjusting these plates.
Roller and mushroom adjustment:
Adjust eccentric compression of roller and mushroom keeps to ensure the optimum compression for the door. Adjust the compression using a 4mm allen key.
Please tick the reCAPTCHA*
Get in touch with a member of the Carl F Groupco team for more information on our products, services, and support.
Can’t see what you’re looking for? Request our 2021 Product catalogue for a full breakdown of all our products.