The push pad emergency exit range comprises of modular components from the push bar range together with a push pad and options of either vertical or side entry pullmans to give variants of one, two or three point latches or bolts.
For use on French doors, the slave lock should be top and bottom locking (use PH356) with the centre pullman closed off using the plastic clip supplied as part of the kit. The master door (use PH358) should have horizontal locking which will enable both door sashes to open should the slave door be the first door activated.
The modular push pad emergency exit range has been tested and certified to EN 179. This type of device is suitable for offices and premises where people are familiar with the exits and the hardware, therefore a panic situation is unlikely to develop.
The mechanism body, pullmans and vertical rod covers are available in powder coated finishes of silver, black, white or metallic silver. It is also available in satin stainless steel plated finish. The push pad device features a green photoluminescent insert.
PH352 - Reversible single point push pad exit latch
PH356 - Reversible 3 point push pad exit bolt
PH358 - Reversible 3 point push pad exit latch
The modular range is available with or without a dogging facility - please specify at time of ordering. Please note that current legislation of BS EN179 specifies that for fire/smoke door assemblies the emergency device shall not include any form of dogging mechanism. Therefore any device incorporating dogging can be used on escape doors only.
The modular range also offers the option of a micro-switch housed in the device. This allows monitoring of the door and access control to be added. Please specify whether micro-switch is required at time of ordering.
Optional outside access devices with lever handle or knob are available in various finishes. These are available as standard or key retaining versions. Where outside access is required, a hole pierced to take an 8mm square spindle and two further holes of 10mm diameter for the screw ports will be required to connect the device and outside together.
All devices can be converted from left hand to right hand in minutes. Simply remove the two screws together with bracket and rotate the arm to the opposite position. Replace bracket and screws. The push pad is simply positioned into aperture of arm and secured with grub screw.
To suit doors up to 2585mm high: Extra long vertical rods are available for doors up to 3150mm high.
The finishes below are applicable to all products of the modular push pad range.
|Silver EPS (20)||Satin Silver Steel Plated SSSP (44)|
|Black EPB (01)|
|White EPW (25)|
|Metallic Silver MSP (59)|
|Other colours (00) maybe produced to special order|
Entirely surface mounted except where outside access function is required.
Full instructions are supplied with each device.
All the devices of Emergency Exit Hardware (with push pad) in this section have been tested and certified to BS EN 179:2008.
This type of device is suitable for offices and premises where people are familiar with the exits and the hardware and therefore a panic situation is unlikely to develop
Click thumbnail image to load images viewer