The surface mounted modular push bar panic device range comprises of modular components – standard mechanism, idler and cross arm, together with either vertical or side entry pullmans to give variants of one, two or three point latches or two/three point bolts.

Keeps are available for timber, PVCu, aluminium or steel doors and are profile specific. For use on French doors, the passive lock should be top and bottom locking (use PH355) with the centre pullman closed off using the plastic clip supplied as part of the kit. The master door (use PH357) should have horizontal locking which will enable both door sashes to open should the passive door be the first door activated.

The modular push bar with full width cross arm has been tested and certified to EN 1125. This type of device is suitable for all public buildings such as hotels, schools, shops, hospitals, nightclubs etc. where people are unfamiliar with their surroundings.

The reversible mechanisms, idlers, pullmans and vertical rod covers are available in powder coated finishes of silver, black, white or metalic silver plus the option of a satin anodised aluminium, stainless steel or green cross arm. It is also available in satin stainless steel plated finish. Various RAL colours are available to special order from Strand - please enquire for details.

PH350 - Reversible single point panic latch

PH357 - Reversible 3 point panic latch

PH 355 - Reversible 3 point panic bolt

Dogging Facility

The modular range is available with or without a dogging facility - please specify at the time of ordering. Please note that current legistlation of BS EN1125 specifies that for fire/smoke door assemblies the panic device shall not include any form of dogging mechanism. Therefore any device incorporating dogging can be used on escape doors only.

Mircoswitch

The modular range also offers the option of a micro-switch housed in the device. This allows monitoring of the door and access control to be added. Please specifiy whether a micro-switch is required on the mechanism, idler or both.

Outside Access

Optional outside access devices with lever handle or knob are available in varous finishes. These are available as standard or key retaining versions and can be supplied with standard or high security cylinders. Where outside access is required, a hole pierced to take an 8mm square spindle and two further holes of 10mm diameter for the screw ports will be required to connect the device and outside access together.

Handling of Reverse Devices

All devices can be converted from left hand to right hand in minutes. Simply remove the two screws together with bracket and rotate the arm to opposite position. Replace bracket and screws. The idler mechanism is converted in exactly the same way.

Size of Doors

Standard devices suit doors up to 2585mm high by 1050mm wide; for wider doors the range includes cross arms of 1150mm or 1450mm. Vertical rods are available to suit doors up to 3150mm high.

Fixing

Entirely surface mounted except where outside access function is required.

Full instructions are provided with each device

Finishes

The finishes below are applicable to all products in the modular range. Other colours and finishes may be produced to special order.

*Plated finishes may be produced to special order

Glass Doors

Patch fittings suitable for glass doors are now available for push bar, push pad or touch bar. The range is supplied in kits for single or 2/3 point latches and bolts in a variety or finishes which are quick and easy to install.

All the devices of Panic Hardware (with full width cross arm have been tested and certified to BS EN 1125:2008.

This type of device is suitable for all public buildings such as hotels, schools, shops, hositals, nightclubs etc. where people are unfamiliar with their surroundings.