The item has been successfully added to your quote basket.
More
Designed to deliver instant security, automatically engaging locking points on closing the door. Developed to complement contemporary and heritage door styles.
The automatic multi-point lock mechanism instantly engages security latches from independent trigger points as the door closes - removing the need to lift the handle. The versatile gearbox design allows for decorative key retract and lever operated door furniture. Improving ease of use for residents with limited dexterity, the Yale AutoEngage offers a versatile solution for people and properties.
Locking Points:
Door Types
Faceplate:
A Eurogroove is an industry standard feature on most PVCu, aluminium and timber door and window profiles, where the locking devices are fitted.
A Eurogroove is the groove in the profile in which multipoint locks and espagnolettes are fitted. This is always 16mm for PVC, but can be 20mm in Timber.
PAS 24 is an enhanced security performance test for door assembly requirements, every component used within the door set tested must comply to the relevant British Standard for that component.
PAS 24 includes several security tests, such as:
An example of the intensity of the testing, the mechanical loading tests subjects the door set to 4.5Kn of pressure, the equivalent of approximately 45 times the pressure used to tighten a car wheel nut.
Backset
The backset is the dimension from the front of the faceplate to the centre of the handle spindle or cylinder hole.
The most popular backset sizes are 25mm, 30mm, 35mm and 45mm.
The backset dimension is the distance between A and B on the diagram.
PZ Centre
The "PZ" or "Centre" is the distance between the centre of the handle spindle and the centre of the round section of the cylinder.
The PZ Centre dimension is the dimension between C and D on the diagram.
Multipoint locks can have one or two spindle holes (also known as followers) these type of locks will have two measurements, the most popular being 62mm / 92mm.
Most modern locks with one spindle are 92mm centre, however some older locks may be 70mm or 72mm.
Please tick the reCAPTCHA*
Get in touch with a member of the Carl F Groupco team for more information on our products, services, and support.
Can’t see what you’re looking for? Request our 2021 Product catalogue for a full breakdown of all our products.