MACO C-TS French Door Locks

C-TS Master
243651 Slave Lock
C-TS Master
243651 Slave Lock

MACO C-TS French Door Locks

  • Master and slave door locks
  • Master Door Locking Points: 2 Hooks, 2 Rollers, Reversible Latch And Deadbolt
  • Lever or split spindle operation
  • High security
  • 35 and 45mm backsets available

More

Description
Questions & Answers

The highly secure C-TS locking system by MACO is available to suit French door sets. The locking comprises of a master door lock which features 2 hooks, 2 rollers, reversible latch and deadbolt, which is the same locking points as the standard single residential door lock. It is more compact to suit the smaller door height of French doors while also offering the ability to achieve PAS 24.

The Slave door lock includes a C-TS centre section to allow for lever handle operation. Shootbolts can be fitted to the top and bottom to secure the slave sash in place.

This lock can be supplied with the upgraded Tricoat Plus coating as standard providing 1,000 salt spray testing to BS EN 1670, if required.

What is a Eurogroove?

A Eurogroove is an industry standard feature on most PVCu, aluminium and timber door and window profiles, where the locking devices are fitted.

A Eurogroove is the groove in the profile in which multipoint locks and espagnolettes are fitted. This is always 16mm for PVC, but can be 20mm in Timber.

 

What is PAS 24?

PAS 24 is an enhanced security performance test for door assembly requirements,  every component used within the door set tested must comply to the relevant British Standard for that component.

PAS 24 includes several security tests, such as:

  • Manual intervention
  • Mechanical loading
  • Hard and soft body impact

An example of the intensity of the testing, the mechanical loading tests subjects the door set to 4.5Kn of pressure, the equivalent of approximately 45 times the pressure used to tighten a car wheel nut.

How do I measure the PZ centre and Backset on a door lock?

Backset

The backset is the dimension from the front of the faceplate to the centre of the handle spindle or cylinder hole.

The most popular backset sizes are 25mm, 30mm, 35mm and 45mm.

The backset dimension is the distance between A and B on the diagram.

 

PZ Centre

The "PZ" or "Centre" is the distance between the centre of the handle spindle and the centre of the round section of the cylinder. 

The PZ Centre dimension is the dimension between C and D on the diagram.

Multipoint locks can have one or two spindle holes (also known as followers) these type of locks will have two measurements, the most popular being 62mm / 92mm.

Most modern locks with one spindle are 92mm centre, however some older locks may be 70mm or 72mm.

 

Enquire Now

About This Product

General Enquiry

Request a Meeting

Please tick the reCAPTCHA*

Please tick the reCAPTCHA*

Please tick the reCAPTCHA*